Model 7100 Technical Specifications

The Model 7100 is based on the same system architecture and topology as our Model 755 and 770 amplifiers. The power stages are virtually the same and the sound is everything you have come to expect from Outlaw. The Model 7100 is built in the USA to our design and specifications, and the major specs are as follows:

Power Output (FTC): 7 x 100 watts @ 8 ohms, 20 - 20kHz, 0.05% THD, All Channels Driven

7 x 165 watts @ 4 ohms, 20 - 20kHz, 0.05% THD, All Channels Driven

Signal to Noise: 119dB "A" weighted

Frequency Response: 20Hz. -20kHz. +/- 0.1 dB at rated output

Total Harmonic Distortion: < 0.05% at rated output, all frequencies, <0.01% at 1 kHz.

Intermodulation Distortion: < 0.05% at rated output.

Power Bandwidth: 5Hz - >100 kHz +0/-3 dB

Damping Factor: > 400 from 10 Hz to 400 Hz

Crosstalk: > -90 dB from 20 Hz to 20Khz

Gain: Voltage gain of 28.

Slew Rate: 50v/Microsecond

Input Impedance: Nominal 50k ohms

Input Sensitivity: 1.00 Volts for Full Rated Output

Remote Trigger Voltage: 3 - 32 Volts DC at 5 milliamperes or greater

Dimensions: (HxWxD): 5" with feet x 17.2" x 16.2"

Weight: 51 lbs

Power Requirements: 115VAC, +/- 3%, 50Hz - 60 Hz. 1200 watts, maximum

Copyright © 2005, Outlaw Audio, LLC. All Rights Reserved